Description: 3D Printed. Colors will vary between black and gray READ. IF YOU ARENT SURE YOU NEED THIS, YOU DONT NEED THIS. IF YOU NEED THIS, YOU KNOW YOU NEED THIS. Magazine conversion follower for VZ52s that have been converted to use 7.62x39. If you're a fellow VZ52 owner who is tired of not being able to use your rifle due to 7.62x45 being unobtanium, then you're in luck, you have options! For years Numrich has sold the 7.62x39 chamber conversion kit (https://www.gunpartscorp.com/products/197610) but the drawback was always either living with an unreliable magazine due to it being several mm too long for the new rounds, or dropping over $100 on a VZ52/57 magazine if you can even find one! The follower has "7.62x39" embossed on it as a way to non-permanently mark that your rifle has been converted. As opposed to something destructive like engraving the gun, or just remembering that it's converted (which is great until you sell it or pass it down and the next guy isn't awares!) Spacer Installation: The spacer needs to be glued to the inside of the mag body. In my experience super glue isn't enough, but an adhesive caulk works very well. The thickness of the caulk fills in gaps and stabilizes the spacer in addition to adhering it to the magazine wall. Installing the spring: Turn the spring upside down and slide the rounded end into the slot as shown in the photo.
Price: 15 USD
Location: Glen Cove, New York
End Time: 2024-07-19T02:56:54.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Country/Region of Manufacture: United States
Material: Polymer
Gauge/Caliber: 7.62 x 39 mm
Number of Rounds: 10
For Gun Type: Rifle
Brand: Unbranded