Schaller S-Locks Strap Locks for Guitar

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer - Full Warranty Schaller S-Locks Strap Locks for Guitar - Black Strap Lock Set for Guitars - Brand New - Description With Schaller Security Locks, we developed and patented a completely new product in 1981, probably the most secure connection between guitar and strap. In 2018, the next generation was introduced with the S-Locks. S-Locks: S For Safe, Silent & Schaller Strap Locks In the development of the new revolutionary S-Locks we have combined 3 parts to perfection: unique one-piece hardened steel strap buttons S-Locks suitable for different belt thickness with ergonomic operation and a patented locking nut - Lock-Wheel - with triple security architecture. The S-Locks New Strap Button new and unique one-piece construction, easy to install via 3 mm (1/8) Allen key. special 4 mm wood thread in S-Lock size M for maximum grip. Optionally available in sizes S (3.5 mm) and L (4.5 mm). Please refer to the installation instructions in the description below for size specifications. hardest steel for maximum wear resistance and safety including high-grade felt washers to protect your instrument The S-Locks Improved New Lock extended thread length for holding straps of up to 6 mm thickness, newly designed slanted locking bolt made of stainless steel for minimum wear and thus maximum safety new design pull-up ball for best haptics suitable for a standard hole in the belt of 10 mm The New Lock-Wheel: Featuring 3-Stage Safety Concept Lock-Wheel with special patent thread ensures a secure hold. It can be tightened safely by hand without tools. The 2-hole mount (suitable for 2 mm Allen key or screwdriver) allows a firmer tightening torque of the Lock-Wheel with maximum hold. Undetachable hold due to grub screw with tapered cap and slot 2.5 x 5 mm made of stainless steel. Simply unscrew the set screw again to unscrew the Lock-Wheel; the thread remains functional and cuts itself free again through the Lock-Wheel. Final Put all parts together and give it a shake Sounds of silence - You will be amazed: Whether on stage or in the studio, S-Locks do not rattle. Compatibility Schaller Security Locks And S-Locks a.) s-locks are compatible with all existing schaller security locks like this: strap button old SecLock + lock new S-Lock (without silent feature!) strap button new S-Lock + lock old SecLock only limited, we do not recommend it. Please always use our new S-Lock lock with Lock-Wheel on your strap, then you will always be compatible with all strap buttons and at the same time you will always use all the advantages of our new Lock-Wheel. Please always make sure that the lock is engaged in the strap button, the lock is attached to the belt in such a way that the strap button is secured in the U-shape of the lock and that the instrument does not rotate. schaller s-locks: only original in the pictured crystal box It can also be used as a sustainable storage container after removal of the protective foam. The package contains: 2 x Strap Buttons with high-grade felt washers 2 x Locks 2 x Lock-Wheels Assembly Instruction Schaller S-Locks assembly of the strap buttons Screw the strap buttons with attached felt washer into the existing drill holes by hand using a 3 mm (1/8) Allen key. Please ensure that the strap buttons are fully seated on the wood, if necessary, first rub the wood flat first. If there is no drill hole yet, drill it depending on the wood used. S-lock dimensions in sizes: L = male thread 4.5 mm, inside 3.2 mm length 27 mm M = male thread 4.0 mm, inside 3.0 mm; length 22 mm (standard) S = male thread 3.5 mm, inside 2.4 mm; length 18 mm We recommend choosing the strap button first to match the size of the existing hole in the guitar. If the hole is too big or too small, please choose a different strap button or reduce, close, re-drill or extend the hole. If necessary, countersink separately in the area of the outer lacquer layer to prevent the lacquer from flaking off when screwing in the strap button. Carefully screw in the strap button into the wood and, if it is too tight, unscrew it again and gradually drill up the drill hole. If the strap button is too easy to screw in, then reduce or close the hole and drill again appropriately. Tighten the strap button hand-tight to the instrument body. Do not continue by force. The wood may break, flake off the paint and tear off the strap button. Please check the secure fit of the strap button in the wood regularly and retighten the screw if necessary or reduce or close an enlarged hole as described and re-drill. assembly of the locks on the belt Insert the lock through the hole in the strap. The lock is on the inside of your belt and the threaded hole for the lock-wheel on the outside. The open side of the lock (U-shape) points in each direction to the belt, so that the instrument can later safely hang in the lock. If the hole in the belt is too narrow or there is only one slot in the belt, please cut away a piece of the belt in a circle (10 mm) that the thread can be easily pushed through the lock without the leather parts standing upright. Otherwise, the lock wheel can not be securely fastened and the lock and lock wheel can disengage. Recommendation: If necessary, punch a hole of 10 mm in the leather strap with a round hole punch tool, then our S-Lock lock fits exactly through the leather strap and our lock wheel can be optimally screwed on and locked. Installation of the Lock-Wheels (3-stage safety concept) Turn the lock-wheel clockwise onto the thread of the lock. The flat side must point to the belt; the rounded side up! Make sure that the small set screw in the lock-wheel is not screwed inwards and destroys the thread. Use a 2 mm (5/64’’) Allen key or small screwdriver through the 2-hole mount for an even tighter fit of the lock-wheel for maximum grip. Screw in the slotted set screw with cone dome (2.5 x 5 mm) with a screwdriver until it stops. This will block the thread and the lock wheel can no longer loosen. Tip: Please use the Allen key or thin screwdriver to tighten the lock wheel very firmly (level 2) before screwing in the micro screw (level 3). This gives the lock a firm hold and the 3 tapered pins on the inside of the lock penetrate the leather belt and prevent the lock from twisting. Guitar straps made of leather, imitation leather or other materials compact when pressed together. Therefore, the lock-wheel must be tightened again after some time at the beginning. Before retightening, always loosen the small grub in the lock-wheel first, otherwise the thread will be damaged. By retightening the Lock-Wheel, the three small pins on the lock press into the surface of the strap and prevent the lock from accidentally twisting on the strap. to avoid this, please make sure that you have a circular hole in the belt and, if necessary, punch out what exactly corresponds to the diameter of the threaded neck of the lock; press the leather strap as tightly as possible in the area of the lock and lock wheels in advance so that you can then tighten the lock wheel more easily and firmly on the lock; from time to time you tighten the lock wheel again and again until the leather strap is maximally compressed at this point. Always loosen the micro screw beforehand so as not to destroy the thread. Check the secure seating of the set screw regularly and retighten the set screw if necessary. To unscrew the lock-wheel, simply loosen the set screw; the thread remains functional, it cuts through the lock-wheel again free. Before loosening or retightening the lock-wheel, always unscrew the set screw until it no longer points inwards and damages the thread! Function of the S-Locks Pull the lock over the strap button without pulling the ball upwards until the lock clicks into place and the bolt lowers into the strap button. The instrument hangs in the U-shaped lock and is thereby held securely. Check the secure fit. To do this, try to pull the lock without pulling the ball from the strap button. The lock must remain engaged and must not be pulled down by the strap button. The ball must sit on top of the thread. To release the lock, pull the ball and pull the lock sideways away from the open side of the lock. Regularly check all parts for possible wear. Retighten all screws in a timely manner. When playing, always check that the lock is securely seated on the strap, that the lock is locked into the strap button, and that the strap button is securely screwed into the instrument. Please always make sure that the lock is engaged in the strap button, the lock is attached to the belt in such a way that the strap button is secured in the U-shape of the lock and that the instrument does not rotate. There must be a thin gap between the thread of the lock and the pull-up ball. This is sign that the locking bolt is touching the bottom of the strap button and will engage securely before the pull-up ball touches the threaded shaft of the lock. This gives you the assurance that the locking bolt is in the strap button to the maximum. For reasons of simplification, we only show the picture in nickel for the replacement kits. Please select the desired color using the configurator. You will then receive the desired product in this selected color, even if the product is only shown as nickel in the picture. Features/Specs S-Locks: S For Safe, Silent & Schaller Strap Locks In the development of the new revolutionary S-Locks we have combined 3 parts to perfection: unique one-piece hardened steel strap buttons S-Locks suitable for different belt thickness with ergonomic operation and a patented locking nut - Lock-Wheel - with triple security architecture. The S-Locks New Strap Button new and unique one-piece construction, easy to install via 3 mm (1/8") Allen key. special 4 mm wood thread in S-Lock size M for maximum grip. Optionally available in sizes S (3.5 mm) and L (4.5 mm). Please refer to the installation instructions in the description below for size specifications. hardest steel for maximum wear resistance and safety including high-grade felt washers to protect your instrument The S-Locks Improved New Lock extended thread length for holding straps of up to 6 mm thickness, newly designed slanted locking bolt made of stainless steel for minimum wear and thus maximum safety new design pull-up ball for best haptics suitable for a standard hole in the belt of 10 mm The New Lock-Wheel: Featuring 3-Stage Safety Concept Lock-Wheel with special patent thread ensures a secure hold. It can be tightened safely by hand without tools. The 2-hole mount (suitable for 2 mm Allen key or screwdriver) allows a firmer tightening torque of the Lock-Wheel with maximum hold. Undetachable hold due to grub screw with tapered cap and slot 2.5 x 5 mm made of stainless steel. Simply unscrew the set screw again to unscrew the Lock-Wheel; the thread remains functional and cuts itself "free" again through the Lock-Wheel. Final Put all parts together and give it a shake Sounds of silence - You will be amazed: Whether on stage or in the studio, S-Locks do not rattle. We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 41.99 USD

Location: Winchester, Virginia

End Time: 2024-11-29T18:36:31.000Z

Shipping Cost: 0 USD