Paul Components Racer Medium Center Pull Brakeset Silver + Custom Ano Adjusters

Description: Lightly used. Custom anodized light pink spring adjuster knobs. Hardware is for recessed mounting. FRONT AND REAR pair. Pads have lots of life left. FROM PAUL:PRODUCT STORYThe Racer Medium is offered in both a center mount and a braze-on configuration. The Braze-On Racer Medium mounts to a pair of center pull brake bosses positioned on the fork or seat stays at a specific width and distance from the axle. While it can be more difficult to have a frame fitted with these specially positioned brake bosses, it makes for a much stiffer and cleaner looking brake.It is important to note that the Braze-On Racer Medium does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Please refer to our support article on Braze-On Center Pull Brakes for more information. Reach is determined by the height of the center pull brake bosses, which can be positioned by a frame builder to match up with 700c, 650b, or 26″ wheels.The Center Mount version of the Racer Medium features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames, or a longer non-recessed bolt that works with older frames. In this setup the Racer Medium is a medium (or “standard”) reach brake with a range of 47 to 57mm.Between the arms there is enough clearance to fit a 45mm fender and a 32mm wide tire. We think this is a perfect combination for an all-around do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.

Price: 350 USD

Location: Telluride, Colorado

End Time: 2024-11-20T02:14:04.000Z

Shipping Cost: N/A USD