New Kemper Profiling Amp Black Profiler Amplifier Kemper 2306014067908

Description: Description The KEMPER PROFILER is a dream amplifier that allows you to carry your ideal sound with you anytime, anywhere. The KEMPER PROFILER is a digital amplifier that allows you to fully incorporate the characteristics of your favorite amplifiers, effects, microphones, etc. Since the first LINE6 POD was released in 1997, manufacturers around the world have competed to see how accurately and precisely they can reproduce amplifier simulations. KEMPER's answer to this is ``profiling,'' which is also the name of the product, and is completely different from simulation. The KEMPER PROFILER does not simulate in-house, but leaves the profiling to each player, so that each player's sound can be produced even when profiling the same amplifier. The reason for this is that even amplifiers with the same name will have individual differences, such as the degree of wear of the vacuum tubes, as they are used. Existing simulations reproduce a certain value as a standard, but profiling reproduces the individual. The KEMPER PROFILER actually sends a profiling signal to the amplifier, which then amplifies the profiling signal and plays it on the speaker. The KEMPER PROFILER picks up the sound that is played and reproduces the characteristics of the amplifier. The process called refinement that follows involves the player actually playing the profiled sound and making fine adjustments to produce their own unique sound. In addition, an upgraded version of the product also introduces a new function called "Direct Profiling," which allows you to profile the sound of just the head without going through a speaker cabinet. The output of the head you want to profile is sent to a direct box, and then returned to the KEMPER PROFILER from the direct box's line out. This is a profiling method that is especially recommended for those who use heads with built-in power amplifiers. And if you think profiling is too difficult, don't worry. Data profiled by players all over the world is uploaded to a dedicated cloud, RIG MANAGER. At KEMPER, presets are called RIGs, and KEMPER PROFILER owners can try out and download RIGs on the RIG MANAGER for free. (Some RIGs are paid). Of course, if you are able to profile yourself, you can also upload RIGs you have created to the RIG MANAGER. The KEMPER PROFILER can hold up to 1,000 RIGs. You can think of this as carrying around 1,000 amps. Even if you are not good at digital, it has a very easy-to-understand interface, and the fact that it can be operated intuitively is not to be missed. The KEMPER PROFILER is the only digital amp that feels so close to analog. Although it is an amp, it also has over 70 high-quality effects built in, and up to eight can be used at the same time. You can use four (mono) on the pre-amp and four (stereo) on the post-amp. In addition to being able to sync with the RIG MANAGER via the B-type USB connection on the back (requires an A-B USB cable, sold separately), you can also update the version by inserting a USB memory into the A-type USB terminal on the front (rear for the head type). It also has a send/return terminal, so you can of course bring your own effects into the unit. (You will need to insert an effect block in the effect loop for internal processing.) It also has a headphone out terminal and S/PDIF digital input/output. One of the attractions of this unit is that the wide variety of inputs and outputs makes it easy to re-amp, which is mainly useful for recording. The main differences between the head type and rack type are as follows: ・The head type has an instant access knob for MOD, but the rack type does not (internal operation is possible) ・The rack type has only GAIN LEDs on the knobs on the bottom of the case, while the head type has GAIN, BASS, MIDDLE, TREBLE, PRESENCE, and VOLUME LEDs ・The head type has a USB terminal (A type) on the back, and the rack type has a USB terminal (A type) on the front ・The head type has a genuine gig case, while the rack type uses a general-purpose rack case (the rubber feet must be removed to fit into a 3U rack case) ・The head type only comes in white The KEMPER PROFILER has already become a world-standard amplifier. It is no exaggeration to say that the KEMPER PROFILER is the culmination of all amplifiers that have existed up to now. If you have not experienced it yet, please experience the essence of this KEMPER PROFILER. ■Input ・Front Input:1/4 inch TS unbalanced, dynamic range ＞108dB, impedance 1 MegOhm ・Alternative Input:1/4 inch TRS balanced with ground lift, dynamic range =105dB ・Return:XLR balanced,1/4 inch balanced with ground lift, dynamic range =105dB ・Digital In- and Outputs: S/PDIF In/Out 44.1 kHz (24 bit )with RCA Phone connectors (Master only) ■Output ・Master L and R Outputs:XLR balanced,1/4 inch TS unbalanced with ground lift max. output level: XLR +22dBu, TS +16dBu ・Monitor Output:1/4 inch TS unbalanced with ground lift max. output level: +16dBu (cabinet simulator can be turned off individually) ・Direct Output/Send:1/4 inch TS unbalanced with ground lift max. output level: +16dBu ・Output Dynamic Range:＞108 dB ・Dedicated Headphone Output:1/4 inch TRS stereo, 33Ohm ■Dimensions ・HEAD/POWER HEAD Height: 21.7 cm (8.54 inches) Width: 37.8 cm (14.88 inches) Depth: 17.3 cm (6.81 inches) ・RACK/POWER RACK: Height: 13.9 cm (5.47 inches),3 HE (3 RU) Width: 48.3 cm (19 inches) Depth: 22 cm (8.66 inches) ■Weight ・HEAD: 5.32kg ・POWER HEAD: 6.50kg ・RACK: 5.00kg ・POWER RACK: 6.18kg ■Output (only models with built-in power amplifier) 600 Watts at 8Ω 300 Watts at 16Ω Basic Setup Example To profile, simply connect your amp to the Kemper Profiling Amplifier and press the "record" button. Just insert it into the recording line and let it work its magic. A test signal is sent from the Kemper Profiling Amplifier to the amp and recorded to the microphone in front of the cabinet. You don't even need to play the guitar to profile. Within a minute, the Kemper Profiling Amplifier will have acquired the DNA of your amp. Finally, use the A/B comparison mode to switch between the original tube amp sound and the profiled sound and make fine adjustments. This is the quickest and most convenient way to profile. Amplifier Controls The Kemper Profiling Amplifier has the standard Gain, Bass, Middle, Treble, and Presence terminals for guitar amps, but like many vintage amps, the Gain control is designed to be unobtrusive. You can find the sweet spot of your amp and always get the best sound at any Gain level. The Gain control has a range of over 80dB and automatically compensates for the volume when in a clean setting. The Kemper Profiling AMP allows you to dynamically adjust the characteristics of your favorite amps, which would not be possible without hardware modifications. You can make any change, from a slightly vintage Marshall Bluesbreaker profile to a more radical vintage Fender Bassman with a higher gain circuit. Output The Kemper Profiling Amplifire has two independent outputs that can be used in a variety of ways. The main use is to connect at a balanced level. The monitor output can be optionally used to output sound without the cabinet sound. This allows you to take advantage of the power amps and cabinets on stage. ◆Condition: S: New Payment Please pay within 4 days after purchase. Shipping Please refer to Shipping and handling.About other area, please ask me. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. * Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Price: 1278.92 USD

Location: Jpan

End Time: 2024-11-13T08:07:58.000Z

Shipping Cost: 0 USD