Description: Mobile Home Flex Mend 18" x 18" Zipper Trap FlapKit Contains: 18" x 18" zippered trap flapFlex-Mend:Finally - a neat, fast permanent and inexpensive way to mend holes, cuts, and tears in most mobile home bottom closure materials is at hand.Flex-Mend is a time tested mending product that matches the appearance and texture of bottom board closure materials used by most manufacturers in the mobile home industry today. Flex-Mend is a woven polyethylene film currently meeting all requirements for use as bottom board by the mobile home industry. It has been solid coated with specially formulated, high tech adhesive, and has an easily removed release liner. It goes on like a band-aid! Instructions for Installing the TRAP FLAP (A Zippered Access Panel) The TRAP FLAP is a low-cost access panel enabling service to "P" traps or other plumbing connections located below floor level—but concealed by the bottom board vapor barrier. Step 1: Be sure the application surface is clean and free of loose dirt and dust. If necessary wipe down surface \ with alcohol to assure a suitable surface. Begin installation of the TRAP FLAP by placing the black plastic fabric side down on the work surface. Imagine the stitching as a large letter "U". Use a razor or utility knife to make a light cut through the paper release liner, dividing the "U" in half Try to avoid cutting the woven plastic fabric. Do not cut either row of stitching! Step 2: After cutting the paper release liner, peel half of the liner, exposing the adhesive. It is easier to peel from the edges towards the "U". The perforations of the stitching will help tear the paper liner loose. Step 3: Attach the exposed adhesive to the application location with the un-peeled half of the TRAP FLAP hanging. After firmly smoothing the TRAP FLAP in place, remove the release liner from the remaining half—and smooth it firmly in place. The best application includes removal of the release liner from between the rows of stitching, but it is not essential. Step 4: After the TRAP FLAP is completely attached, fully unzip the zipper. Gain access by using a utility knife to follow the zipper path, cutting completely through the TRAP FLAP fabric and the application surface
Price: 14.49 USD
Location: Apex, North Carolina
End Time: 2024-11-19T20:16:39.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: 20%
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
California Prop 65 Warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Manufacturer Part Number: FM1818
Brand: Flex Mend
