Description: PIC-P18-14 Prototyping PCB for 14- and 18-pin Microchip PIC Microcontrollers with RS232 Port, Status LED, 6-pin single row (Olimex) and RJ12 (Microchip) ICSP connectors, 3.3V & 5.0V Power Supply Circuit and exchangeable Crystal Oscillator Circuit PIC Prototype Board Features Ships completely assembled and tested 14-pin and 18-pin DIL microcontroller sockets Jumper Selectable +3.3V/5.0V board supply voltage Power plug-in jack: 5.5mm outer, 2.5mm inner diameterAccepts AC and DC input voltageMinimum Input voltage should be 2.0VDC or 1.5VAC higher than desired board supply voltageMaximum Input voltage 12VDC or 9VAC RS232 DB9 female connector with MAX2232 interface circuit and Tx, Rx, CTS, DTR/RTS signals Rx and Tx pins are connected to PIC UART pins (check schematic for pin compatibility with PIC device of your choice) Connect CTS,DTR/RTS signals to general I/O pins of your choiceMAX2232 provides reliable RS232 at 3.3V and 5.0V board Vcc 6-pin single row (top view) and RJ12 ICSP/ICD connectors for in-circuit programming and debugging 20 MHz quartz crystal oscillator in machined, spring loaded socket for easy replacement Reset button Push button connected to RB0 (DIP18) and RC3 (DIP14), can be connected/disconnected via jumperStatus LED connected to RB3 (DIP18) and RC2 (DIP14) via removable jumperExtension solder pads for every µC pinGrid 100 milsGND busVcc busFR-4, 1.5 mm (0.062"), single layer, electroless nickel/immersion gold (ENIG) plating, green soldermask, white silkscreen component print
Price: 4 USD
Location: Carson City, Nevada
End Time: 2025-01-09T19:56:36.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
