Melamine Edge Banding 3/4 Inch X 50Ft Black Edge Banding with Hot Melt Adhesive

Description: ★【 High Quality Edge Banding】Black edge banding is made of high quality melamine material and pre-glued with strong adhesive, durable and strong, smooth surface, not easy to dirty, perfect for repairing or finishing off cabinets, DIY projects, shelving or repairing furniture.★【Black Melamine Edge Banding】This roll of black cabinet edge banding is durable and has a pre-glued hot melt adhesive on the back. Our edge banding is ready for your application and easy to use without snagging or splitting and enhances a high-quality finish.★【Hot Melt Adhesive Edge Banding】Unlike most edge banding designs that have extremely thick glue which is hard to melt, we use the optimum amount of pre-glued hot melt adhesive is evenly distributed across the edge banding for a strong, permanent bond that will last for years.★【Easy to Apply】Black edge banding is very easy to apply, simply place it on the item and heat it with an ordinary household iron or hair dryer to hold the edge banding in place. If there is an excess edge band, trim it off with a razor blade. Melamine edge banding is rolled very tightly and is easy to hold accurately.★【Versatile for a Range of Surfaces】Edge banding is used to enhance and supply a complete look to your shelving and cabinetry. You can use this edge banding on either flat or cylindrical objects and it adheres well to various surfaces including plywood, metal, wood or hardboard. Ideal for high traffic areas where edges a modern high end and durable finish is required product. Product Description QSAEHLS provides the best quality black melamine edge banding strips with customer focus, and experience wonderful DIY edging to ensure a neater and more complete appearance How to use？ Clean up the edges Iron on the edge banding Press it while it's hot Slice off the ends Touch up with a sanding block EXPERIENCE DIY EDGING INSTANTLY -QSAEHLS Top Quality Edge Banding Use this excellent quality with strong self-adhesive black edge banding to repair chips, dents, water stains and outdated colors on your shelves, cabinets and other furniture. Finishing your project with edge banding increases the durability of your project and gives it a modern, neat, completed look. Flexible Edging Does Not Chip High Quality Durable and Strong Smooth Surface Not Easy to Dirty Strong Adhesive Easy Application Step one Iron on the edge banding Keep the Banding Centered with Onehand Advance the Iron Down thelength of the Banding Step two Press it while it's hot Immediately After Heating,Press Down Firmly Step three Slice off the ends Using a Sharp Chisel Blade,Trim Away the Excess Banding on all Sides Step four Grinding and trimming Trim with a sanding block, keep it natural, and then enjoy What Is Edge Banding Edge banding is a thin material used to seal the exposed and raw edges of plywood. Heat sensitive adhesive on one side is applied to the board while the other side acts as a barrier against dirt and moisture. Edgebanding is mainly done to cover plywood sides in order to match a cabinet’s finished look, but it also protects the inner plywood from possibly warping. Edge Banding Materials Edge banding is a strip of wood veneer with heat sensitive adhesive on one side. With a roll of wood veneer edge banding and a few simple tools, you can cover raw plywood edges so the plywood is nearly indistinguishable from solid wood. Iron-on edge banding is wood veneer with hot-melt adhesive preapplied to the back.

Price: 19.99 USD

Location: Denver, Colorado

End Time: 2024-01-15T22:08:56.000Z

Shipping Cost: 0 USD