Description: Passenger Car Interior KIT for the Rivarossi 85ft Smooth-Side Duplex Sleeper Car Included in the KIT are 10 pieces of “sleeping passengers”; 4 singles and 6 doublesThe “sleeping passengers” are separate to facilitate painting.Seated and standing passengers NOT included! There are notches in the floor to fit around the protrusions and the roof/window latches. This KIT consists of 2 pieces to be glued together to create the interior. “Super Glue” works well; please heed warning below. When gluing the parts together use a ruler to keep them straight. The beds in the compartments are the flat rectangles for the installation of the “sleeping passengers”. The seats are low, to allow for the installation of an LSW beneath the interior floor for car weight. Lower level seated and standing people should have their feet trimmed. LSW078 is recommended for weight because it clears the window locking tabs and guides. (You still have to mark and punch out the holes for the 5 “pips” and truck screws.) (Lead sheet is not included with the kit.) Bond the completed interior to the previously installed LSW078 with automotive weather stripping adhesive. Put frosty tape on the inside of lavatory window for privacy. The depicted Duplex Sleeper car with the shown LSW078 weighs 7.2oz L = 11 5/16in.; W = 1 3/32in.; H = 7/8in.; Weight = 1.3ounces I attempt to provide the most accurate description possible. My intention is to prevent any surprises. WARNING: CHOKING HAZARD - Small Parts - Not for children under 14 years of age. Your purchase will come packed for damage-free inter-planetary shipment If you have any questions, PLEASE ask. Thank you for looking! Please leave a 5-Star review. If you purchase more than one item from me, I will combine shipping anywhere I safely can, and refund the difference in shipping cost to you. Warning! Do not install the interior in the passenger car sooner than 12 hours after using “Super Glue”. Cyanoacrylate adhesives release fumes that will attack and mar your windows and other surfaces.Accessories, accessory, parts, up-gradeInteriors currently available:12Duplex-RivSS for the Rivarossi 85ft Smooth-Side Duplex Sleeping Car24Comb-RivHW for the Rivarossi 85ft Heavy-Weight Baggage Combine Passenger Car25Obs-RivCS for the Rivarossi and IHC 85ft Corrugated-Side Observation Car35Obs-RivSS for the Rivarossi 85ft Smooth-Side Observation Car36Grill-RivSS for the Rivarossi 85ft Smooth-Side Grill Car42Obs-RivHW for the Rivarossi 85ft Heavy-Weight Observation Passenger Car48Diner-ConCS for the Con-Cor 85ft Corrugated-Side Dining car48Diner-RivHW for the Rivarossi 85ft Heavyweight (1920’s) Dining car;48Diner-RivSS for the Rivarossi 85ft Smooth-Side (1930’s) Dining car;52Coach-AthSL for the Athearn 72ft Stream-Lined Coach Car54Coach-ConCS for the Con-Cor 85ft Corrugated-Side Passenger car.54Coach-RivCS for the Rivarossi 85ft Corrugated-Side (1940’s) Passenger car;58Coach-RivSS for the Rivarossi 85ft Smooth Side (1930’s) Passenger car;60Coach-AthHW for the Athearn 72ft Standard Steel Coach (Heavy-Weight) Car60Coach-RivHW for the Rivarossi 72ft Heavy Weight (1920’s) passenger Car;68Coach-IHCHW for the IHC 85ft Heavyweight Coach (Premier Series)92Coach-Horizon for the early Walthers Horizon Coach Commuter car (Rear & Front facing seats)96Coach-Horizon for the early Walthers Horizon Coach Commuter car (Front Facing seats) Also Available:LSW078, LSW100 and LSW118 Lead Sheet for Weighting rolling stockRailing3 -- Railing for use on walkways or on top of vertical cylindrical tanks.S6TP04S and S6TP05S Rivarossi Truck Pin Replacement ScrewsTJ R1 for Central Valley Trucks TJ V2 for Kadee Trucks
Price: 32.95 USD
Location: Marietta, Georgia
End Time: 2024-08-04T22:34:19.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Features: Not Painted
Control System: N/A
California Prop 65 Warning: This product may contain substances that are known in the State of California to cause reproductive harm, birth defects, cancer, or other grave illnesses.
Gauge: HO
MPN: 12Duplex-RivSS
Rail System: N/A
Age Level: 17 Years & Up
Time Period Manufactured: 1930-1939
Assembly Status: Unassembled Kit
Item Length: 11 5/16ths inches
Item Height: 7/8 inch
Vintage: No
Country/Region of Manufacture: United States
Material: Plastic
Scale: 1:87
Year Manufactured: 2023
Grade: C-10 Mint-Brand New
Corporate Roadname: N/A
Item Weight: 1.3oz
Brand: Miscellaneous Railroad Company
Replica of: Pullman Duplex Sleeper Car 12-4
Color: Beige
Theme: Transportation
Type: Duplex Sleeper Car