Description: You are looking at the highest quality lubrication on the market! Test results indicate Hy-Speed is the Racer’s Choice for small high-speed bearing and bushing technology. Hy-Speed provides the racer /Hobbyist the ultimate advantages of the extreme friction reduction at both very low and extremely high temperatures. With lubrication stability well in excess of the boiling point of water. Hy-Speed is unaffected by electric or gas motor heat build-up and is therefore an ideal choice for not only motor bearings and bushings, but also wheel and differential bearings. Hy-Speed retains its lubricating qualities for race after race, week after week, even month after month. Hy-Speed’s performance is superior to chlorofluorocarbon, silicone, fluorosilicone, ester and high performance hydrocarbon lubricants. Hy-Speed does not decompose, burn or react to form gummy or solid contaminants which may occur in other lubricants, thus robbing you of the ultimate advantages of extreme friction reduction. Hy-Speed’s excellent lubricating performance, chemical inertness, non-flammability (ASTM tested to 1200°F) and corrosion resistant strength make it a perfect bearing and bushing lubricants! In “Time to Bearing Failure” ASTM 3336 tests, Hy-Speed out-lasted fluorosilicone lubricants (a product superior to the common R/C industry pure silicone lubes) by 5 Times! Hy-Speed has no effect on metals, elastomers, plastics, fiberglass or graphite’s. Hy-Speed is also a superior lubrication for fishing reels, firearms, roller skates, skate boards, locks, tools, office and home equipment and wherever else excellent, long –lasting results are necessary. Hy-Speed is resistant to water, saltwater and most chemicals, thereby making it one of the best rust and corrosion preventative oils available. We now make this oil available in a 25ml. poly bottle with a threaded top fitted with a 20 guage stainless needle. The slip on sealer cap cannot be lost DIRECTIONS: Always clean new bearings to remove preservative oils and manufacturing contaminants. Failure to do so may result in lower performance or lessened bearing life. Old, Used bearings must also be thoroughly cleaned. Apply one or two drops of Hy-Speed to each bearing. Excessive application is NOT necessary to assure top performance. For bushings, apply one or two drops to each bushing. NOTE: Excessive use of any lubricant leads to an increase in the build-up of dirt, grit, tire dust and other road contaminants. Because less Hy-Speed is required for top performance, fewer contaminants will adhere to your bearings and bushings. For less than 1¢ per bearing you can substantially increase your bearing life and reduce the high cost of bearing replacement. PRECAUTIONS: Avoid prolonged contact with skin or contact with eyes. Keep away from flames to avoid toxic fumes. Do not permit to contaminate tobacco products. Provide adequate ventilation where temperatures exceed 260°C (500°F). Safety: Wash hands thoroughly after handling and before smoking. First Aid: Skin Contact. Wash with soap and water. Eye Contact, Immediately flush eyes with plenty of water for 15 Minutes and call a physician. Track Page Views With Auctiva's FREE Counter
Price: 7.98 USD
Location: Naperville, Illinois
End Time: 2024-02-06T22:42:02.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: 15%
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Featured Refinements: 1/24 Drag Slot Car
Brand: Koford
Type: Car
