Duraflex Avenge Vented Hood for Wrangler Jeep 07-18 ed

Description: About Store Contact Shipping Feedback Duraflex Avenge Vented Hood for Wrangler Jeep 07-18 ed_117934 Description / Notes: Part #: ed_117934 Make: Jeep Model: Wrangler Material: FRP Condition: New Product Notes : Duraflex Avenge Vented Hood for Wrangler Jeep 07-18 ed_117934 Description : 2007-2018 Jeep Wrangler JK Duraflex Avenge Vented Hood - 1 PieceNote: Hood pins are required.Hand laid, high quality 6 oz. fiberglassSignature black finishHigh quality weather resistant aluminum mesh grille (where applicable)Proprietary polymer blend for maximum flexibilityIncreased durability and longer service lifeModified AerodynamicsReduced damage rate up to 75%Limited warranty and satisfaction guarantee New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer All hoods and hood accessories offered by Duraflex are designed as aftermarket accessories intended for off-road and show use only. Duraflex assumes no responsibility for any damage or injury resulting from the use of these products. Duraflex hoods are often lighter than stock hoods and may feature vented designs, which can create additional aerodynamic lift at high speeds. Therefore, hood pins or AeroCatch latches are necessary to ensure safety, as standard hood latches may not provide sufficient security. Due to the nature of fiberglass and the manufacturing processes involved, Duraflex hoods are not direct bolt-on parts. They often require significant preparation, including sanding, cutting, shaving, and filling gaps. In some areas, additional fiberglass reinforcement may be needed. Drilling holes for mounting, making custom fitting adjustments, and modifications, such as drilling holes for windshield washer nozzles and tubing using a rotary tool, may also be necessary. It's important to note that not all original components, like washer nozzles and tubing, may be transferable to the Duraflex hood, depending on its design; therefore, modifications or replacements may be required. Hood Latch Adjustments Duraflex hoods typically require repositioning the hood latch to ensure proper alignment and closure. This involves carefully adjusting the latch and making small tweaks to move it up or down, or forward and back, until the striker catches securely. Because fiberglass hoods may have slight variations or warping, additional fitting—such as enlarging mounting holes or using shims—might be necessary for proper alignment. Adjustments to or removal of hood bump stops may also be required. Hood Accessories: Scoops and Other Modifications Duraflex offers various hood accessories, including scoops, which can enhance your vehicle's performance and appearance. Installing a hood scoop typically requires drilling holes in the hood for mounting, using bolts or adhesive depending on the scoop's style. When adding hood scoops to fiberglass hoods, it may be necessary to add fiberglass reinforcement around the mounting area to ensure the scoop is securely fastened and properly aligned. Careful measurement and fitting are essential to prevent leaks and maintain the hood's structural integrity. For optimal results, Duraflex strongly recommends professional installation by a custom shop experienced in handling fiberglass components and hood accessories, as traditional auto repair shops may lack the necessary expertise for these modifications. Disclaimer: Duraflex hoods, hood accessories, and other products are intended strictly for off-road and show use only. Due to Department of Transportation (DOT) regulations, many of these products, including hoods and hood scoops, may not be street legal. Duraflex does not endorse or recommend using these products on public roads or highways. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. The eBay parts finder may be inaccurate, go by our listing title and description. Verify with us if you are unsure US Customers PayPal is accepted Visa Master Discover also accepted International Customers Please contact us before purchasing Payment types vary Our goal is to earn 5 star rating with every purchase! Tell us how we can make your exerience a 5-star one! All Copyright © Tilbury Enterprises LLC

Price: 652 USD

Location: Fullerton, California

End Time: 2024-12-13T07:32:00.000Z

Shipping Cost: 0 USD