Description: FEATURESDisplacement: 6cc（1.5cc*2*2） Bore: 12.2mm Stroke: 12.7mm RPM: Max 3000RPM Power: 0.03 hpWeight: 600g (engine) Pressure: 2 kg / cm2Max. Torque: 1200 g / cmSuitable boat sizes: 70 - 130 cmSuperior Construction: The V2 Steam Engine features a robust die-cast brass body with an integrated stainless steel cylinder liner for enhanced durability. Its composite piston ring ensures optimal sealing and performance.Powerful & Compact Design: Despite its compact size (just the length of a single cylinder), this steam engine delivers impressive power equivalent to that of double-cylinder engines. Experience smooth and stable operation with maximum RPMs reaching 3000.Versatile Operation: Equipped with a complete Stephenson valve system, the V-2 allows for seamless switching between forward and reverse directions—ideal for maneuvering model boats ranging in size from 70 to 130 cm.User-Friendly Maintenance: Designed for ease of use, this model requires simple lubrication procedures before each operation. Regular checks every 10 hours ensure reliability while components should be examined every 50 hours to maintain peak performance.Perfect for Hobbyists & Collection: The main body of the engine uses a die-cast brass structure. The brass cylinder is inlaid with a stainless steel cylinder liner. The piston has a composite piston ring. The crankshaft is supported by a ball bearing. High-precision CNC machined parts. Complete Stephenson valve can rotate forward and reverse.The V-2 steam engine is compact in size, only the length of a single cylinder, but has the power of a double cylinder. It runs very smoothly and stably. ITEM INCLUDESVintage Mini Steam Engine Model Toy Kit x1Instruction x1 LUBRICATINGBefore the engine is running, the oil tank needs to be filled with steam oil. All rotating and moving parts such as crankshaft, connecting rod, crosshead, bearing position need to be lubricated with engine oil.Before each engine operation, it is necessary to drain the accumulated water in the oil tank and refill it with steam oil.Under normal 2kg steam pressure, the lubricating oil in the oil tank can provide lubrication for about half an hour. RUNNING INAlthough precision machining is used, it still takes about an hour to run in the engine to achieve the best working condition. Please do not exceed 2000rpm during the running-in period.After the running-in, check all screws and tighten them if they are loose.. FORWARD AND REVERSEWhen switching reverse gear during operation, please reduce the engine speed first. Switching reverse gear at high speed may cause the engine to stop suddenly and damage parts. If it is difficult to switch, please temporarily turn off the regulator. STARTINGThe normal working pressure of the engine is 0.5-2bar, and the maximum working pressure cannot exceed 3bar. Avoid high-speed operation of the engine in no-load time to prevent damage, the maximum working speed of the engine is 3000RPM. MAINTENANCEAfter the end of the operation, drain the water in the oil tank and check whether the screws are loose every 10 hours. Bearings, rubber rings and other parts that are easy to wear need to be checked every 50 hours, and they need to be replaced if the wear is too large. INSTALLATIONThe engine needs to be installed on a flat wood or metal plate to avoid the deformation of the frame caused by the installation, and the engine connected drive shaft needs to be concentric with the engine. SAFETY NOTESONLY SUITABLE FOR PEOPLE OVER 16+KIDS SHOULD BE ACCOMPANIED BY ADULT.PLEASE BE CAREFUL WHEN YOU ADD THE FUEL.AN O-RING, WHICH IS NOT SO AIRTIGHT AND CAN BE STARTED BETTER.DON'T TOUCH THE SURFACE OF THE MACHINE DURING OPERATIONS TO AVOID BURNS.IF THE MACHINE DOES NOT WORK PROPERLY, DO NOT FORCEFULLY START IT. IMMEDIATELY INSPECT THE ENGINE OR CONTACT CUSTOMER SERVICE. IMPROPER HANDLING MAY INCREASE THE RISK OF MACHINE DAMAGE.IN CASE OF ANY DISCREPANCIES BETWEEN THE 3D IMAGES IN THE INSTRUCTIONS AND THE ACTUAL ENGINE, REPLY ON THE ACTUAL ENGINE MODEL. ABOUT INTERNATIONAL SHIPPINGAs the buyer, you should be aware of possible:Delays from customs inspection.Import duties and taxes which buyers must pay.Brokerage fees payable at the point of delivery.Disclaimer: 'maevasa-88's parts are not sponsored or endorsed by, or affiliated with the brand 'Gift'. ADDITIONAL INFORMATIONThree months manufacturer defect warranty on the goods. If there is any quality issue caused by non-human reason, please feel free to contact us and we will be glad to help you. Hope you will have a wonderful shopping time with us!
Price: 689.99 USD
Location: Nanjing, Jiangsu
End Time: 2025-02-09T07:55:42.000Z
Shipping Cost: 15 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Safety Notes-1: If the machine doesn't work properly, don't forcefully start it
Type: Steam Engine Model Toy Kit
Assembly Status: Ready to Go/Pre-built
Features: High Quality Mini Engine Model, stainless steel cast flywheel, Forging the connecting rod, Cylinder inlaid stainless steel cylin, Die-cast Brass Structure, The crankshaft is supported by a ball b, High-precision CNC machined parts, Complete Stephenson valve can rotate forward and reverse, Displacement: 6CC, Bore: 12.2mm, Stroke: 12.7mm, RPM: Max 3000RPM, Power: 0.03 hp, Max. Torque: 1200 g / cm, Pressure: 2 kg / cm2, Suitable boat sizes: 70 - 130 cm
Material: Brass, Stainless Steel
Year Manufactured: 2024
Age Level: 17 Years & Up
Country/Region of Manufacture: China
Item Weight: 1.32 lb
Safety Notes-3: Improper handling may increase the risk of machine damage
Safety Notes-2: Don't touch surface of the machine during operation to avoid burn
