Clifford G4 Remote control fob CZ57RRKO Alarm starter clicker start transmitter

Description: # Stock #: 574 This item is pre-owned – it will work like new once programmed to your vehicleREMOTE HAS FADED BUTTONS & a chip in the front of case - crack in top of back case cover too see photos One (1) Aftermarket remote keyless entry fob alarm Transmitter control clicker keyfob controller replacement FUNCTIONS AT 100% TESTED & GUARANTEED Clifford / G4 FCC ID: CZ57RRKO (Alternate Spelling: CZ57RRK0) Part #: 705005 G4 Frequency: 433 MHz 5 buttons Compatible with the following systems: Prime Level 2, 4, 5 Programming Instructions: The Level TWO comes preprogrammed as noted in bold text in the following tables. Programming User-Selectable Features 1. Note the column (across) and row (down) numbers of the feature(s) you wish to program. 2. Turn the ignition to the “ON” position or start the engine. 3. Enter the factory preset valet/programming code of “2” by toggling the valet switch (located behind the LED assembly) to the left two times, then to the right (LED on). 4. Immediately hold to the left for about 3 seconds until you hear one horn beep and the LED turns on to confirm the system is in the “Feature Select” position. 5. Select the feature column: Toggle the switch to the right the number of times indicated for the column. Pause. You will hear the same number of horn beeps, confirming your selection. 6. Within five seconds, select the feature row: Toggle the switch to the left the number of times indicated for the row. You’ll hear a beep each time to help you count. 7. If there is a NOTE for the selected feature, perform the actions noted. 8. Pause. You will hear either one or two beeps: two beeps = ON, one beep = OFF. 9. You can select another feature, or you can exit program mode: a. To select another feature in that same column, repeat step 6 within the next five seconds (after five seconds, three beeps indicate return to the “Feature Select” position). b. To select a different feature column, repeat step 5. c. To exit program mode, turn the ignition off (you’ll hear three beeps and the LED will turn off), or wait 60 seconds for the system to automatically exit program mode. Installer-Programmable Features 1. Turn on the ignition. 2. Enter the factory preset valet/programming code of “2” by toggling the valet switch (located behind the LED assembly) to the left two times, then to the right. 3. Hold the switch to the left. You’ll hear one beep after about 3 seconds to indicate user programming mode. KEEP HOLDING (about 12 more seconds) until you hear the 3-beep installer programming mode confirmation. 4. Select the feature column: Toggle the switch to the right the number of times indicated for the column. Pause. You will hear the same number of horn beeps, confirming your selection. 5. Within five seconds, select the feature row: Toggle the switch to the left the number of times indicated for the row. You’ll hear a beep each time to help you count. 6. If there is a NOTE for the selected feature, perform the actions noted. 7. Pause. You will hear either one or two beeps: two beeps = ON, one beep = OFF. 8. You can select another feature, or you can exit program mode: a. To select another feature in that same column, repeat step 5 within the next five seconds (after five seconds, three beeps indicate return to the “Feature Select” position). b. To select a different feature column, repeat step 4. c. To exit program mode, turn the ignition off (you’ll hear three beeps and the LED will turn off), or wait 60 seconds for the system to automatically exit program mode Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days. PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store. Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u). 100% Guarantee Remote Shipping / Return PolicyWarranty/Returns: 1. We have a 30 day return policy. 2. All returns for replacements and refund need an RMA #. 3. Please contact us before returning items so we can give you the RMA # and the proper return address. 4. No refunds / replacements will be granted without an RMA# We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged. Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement. Does this keyless remote entry come with a battery? Yes. It will have a working battery installed. Battery Condition: A. All remotes sold on Keyless4u include working batteries. B. Installed batteries are not tested for battery life- they are simply working. Some are new and some are used. Your vehicle will be installed with one of the following keyless entry systems: a. Standard Keyless Remote Packages: Installed at time of manufacture. b. Optional Keyless Remote Packages: Installed by a dealer. c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. d. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system. . . . . Powered by The free listing tool. List your items fast and easy and manage your active items. . . . . . . . . . . . . . . . . .

Price: 33.83 USD

Location: Wellsboro, Pennsylvania

End Time: 2025-01-14T21:23:33.000Z

Shipping Cost: 6.96 USD