Cisco DNA Center DNAC Lab Dell R630 384GB RAM 4TB SSD 72 vCPUs CCIE EI Lab v1.1

Description: For more information about this Lab, please check our our contact page (see images) This is a Cisco DNA Center DNAC Lab ver. 2.3.7.6 (latest version as of Sept/2024)This Lab is built on a Dell R630 Server w/ 384GB RAM + 4TB SSD Drive w/ VMware ESXi 6.7Dell R620's are very Powerful Servers with 2 x 18-Core Processors (Xeon E5-2699v3).18-Core Processors provide 36 vCPU's. Therefore, this Server has a total of 72 vCPU's This is the minimum number of processor needed to run a DNAC Appliance.However, all components could be upgraded (RAM, Disk, and Processors)Please contact us for upgrade price and availability (check out or contact page) DNAC Lab's Main Features: - 2 x 18-Core Processors (Xeon E5-2699v3 ==> 72 vCPU's)- 4 x Gigabit Ethernet Interfaces - 384GB RAM (Server supports up to 768GB!) - 4TB SSD Drive - Dell SAS SATA RAID Controller - VMware ESXi 6.7 Enterprise Version (with Permanent License)Note: A Monitor is not included. You'll need a Monitor + Keyboard to operate the Server Main VM's included in this DNAC Lab:These are the main VM's for the CCIE EI Lab:- 1 x DNAC Center (DNAC) ver 2.3.7.6 (latest version of Sept/2024)- 1 x Windows 2019 Server w/ 180-day Trial version (Setup as DNS Server)- 1 x Cisco ISE Server ver 3.1 (Identity Services Engine) with 90-Day Demo License- 1 x Cisco CSR1000v Router (configured as Default Gateway) This DNA Center could also be combined with our popular CCIE EI or CCIE Security Labs. In fact, this particular Listing already includes a CCIE EI Lab! Main VM's included in the CCIE Lab: - 1 x EVE-NG ver 5.0.1 (needed to simulate a Viptela SD-WAN Network) - 1 x CML-2 ver 2.7.0 (Latest version; License not included) - 1 x Ubuntu Desktop ver 20.04.2 (Ubuntu Desktop + Server included) - 1 x Ubuntu Server ver 20.04.2 configured with NSO (Network Services Orchestrator) - 4 x IOSv-L2 Virtual Switches built inside EVE-NG - 10 x CAT8000v Virtual Routers built as independent VM's Although 384GB RAM is enough to run DNAC, more RAM may be required to load and run these extra VM's.Therefore we recommend a RAM upgrade for better performance.Please contact us for upgrade price and availability (check out or contact page) CCIE EI Equipment Requirements:The new requirements for CCIE EI Lab Exam can be found at this URL:www.ciscoland.bayjenweb.com/f/CCIE_EI_v1.1_Equipment_and_Software_List.pdfAs this URL shows, the new CCIE EI Lab Exam requires the following Virtual Machines: - Cisco CAT8000v (Replaces the old CSR Routers) with IOS XE SD-WAN ver 16.12 - Cisco IOSv-L3 Routers w/ IOS Software ver 15.8 - Cisco IOSv-L2 Switches w/ IOS Software ver 15.2 - Cisco DNA Center Release 2.3.x - Cisco SD-WAN (vManage, vBond, vSmart, vEdge) Software ver 20.9 Supporting Virtual Machines: - Cisco Identity Services Engine (ISE) - Ubuntu Server ver 18.04.5 - Windows Server This DNAC Lab support all of the requirements mentioned above and beyond! SD-WAN support is provided through the EVE-NG VM mentioned above.These are the main features of the EVE-NG VM provided with this Lab: EVE-NG Virtual Machine:The EVE-NG VM provided with this Lab includes several types of Virtual Devices (Routers, Switches, Firewalls, etc.)It also provides full Viptela SD-WAN functionality, version 20.9.3, which is required by the new CCIE EI Lab Exam ver 1.1This includes SD-WAN Controllers (known as Control Plane components) and WAN Edge Nodes - vBond - vSmart - vManageWAN Edge Nodes (known as Data/Forwarding Plane devices) can be implemented in 2 ways: - vEdge Cloud Routers - IOS XE Virtual Routers (CSR1000v or CAT8000v)In our EVE-NG VM you'll find a Fully Configured and ready to use Sample SD-WAN NetworkThis is done just to demonstrate the full SD-WAN functionality of our EVE-NG VM.We provide all the Configuration Files that you can use to build your own SD-WAN Network Virtual Switches vs Physical Switches:One of the requirements listed above includes a set of IOSv-L2 Switches (IOS ver 15.2)Therefore, our EVE-NG VM is also used to implement 4 x IOSv-L2 SwitchesAlthough not mentioned previously, Cisco also recommends a set of 4 Physical Switches.The Physical Switches are needed for SD-Access, which is not supported by IOSv-L2 Switches.But for all other Switching features, the IOSv-L2 Switches should be enough. As mentioned above, this Lab includes 10 x CAT8000v Virtual Routers built as independent VM's In addition to that, our the EVE-NG VM also includes a set of 10 x IOSv Routers.Therefore, in this Lab you'll find 2 sets of Virtual Routers: - 10 x IOS XE Routers (built as Independent VM's) - 10 x IOSv-L3 Routers (built inside the EVE-NG VM)So you could use either set of Virtual Routers, both of which can be connected to either the Virtual Switches (IOSv-L2) or to the Physical Switches (if any)So you'll have 4 potential combinations: - CAT8000v Routers (independent VM) connected to Virtual Switches - CAT8000v Routers (independent VM) connected to Physical Switches - IOSv-L3 Routers (within EVE-NG) connected to Virtual Switches - IOSv-L3 Routers (within EVE-NG) connected to Physical Switches Warranty:Our Servers are fully tested and therefore they are guaranteed to work!If you experience any problems, we'll replace it!Therefore, you can buy with confidence from us. Processing and Shipping Time:Due to the complex nature of this item, we need 5 business days to prepare it (Software installation, configuration & testing)Ground shipping fee applies to the Continental USA (lower 48 states) only.Typical Transit time is 3-5 business days via FedEx Ground (it depends on where you live)Therefore, this item may take up to 10 business days for delivery. Please take this into account.Please ask for a shipping quote for Orders outside the Continental USA or International ones.

Price: 1599.99 USD

Location: Winter Springs, Florida

End Time: 2024-10-30T21:59:00.000Z

Shipping Cost: 69.87 USD