Description: Oscilloscope Mode AUTOOL BT280 circuit tester supports sampling interval setting. The supported voltage test range is: 1V~100V. Function button "START/STOP" (press "OK" to start or stop waveform refresh); "DIV", the test range of each grid voltage is 1V-100V. Press the "UP" and "DOWN" Injector Test The AUTOOL BT280 circuit detector can feed different pulse signals to the injector and provide 4 pulse modes to better detect the condition of the injector. .Smart test Mainly used for quick testing with no need to switch between different test modes. It can automatically identify the signal under test and display the voltage or ohmic value. Main test functions: voltage test, resistance test, positive and negative test.Component activation The Component Activation function is designed to generate an activation signal to the component under test, such as activating on-board electrical tools such as lights, motors, etc. (To avoid burning the components, please refer to the specifications and parameters of the components, and then set the overload current value)Relay test The AUTOOL BT280 circuit tester can perform the continuity test of the 5-terminal relay and the 4-terminal relay through the matching special test terminal.Provide 0-5V power supply The 0-5V power supply mode of AUTOOL BT280 is designed as active mode, but the function is different from the component activation mode. The tool can regulate the voltage output below 5V and limit the current below 100mA. (This is a safe range of current and voltage to avoid burning out electronic components).Multimeter modeThis digital display intelligent multimeter can meet all the functions of the vehicle multimeter [DC voltage (VDC), resistance (OHM), diode / on/off test (DIO), current (AMP), frequency (HZ)], as well as continuous testing of circuits or components of the vehicle circuit system, which brings great convenience to the user.Available in 14 languages. Multi-language feature options. It supports 14 languages including English, Spanish, German, French, Italian, Portuguese,Polish, Russian, Vietnamese, Thai, Indonesian, Arabic, Malaysia Traditional Fillipin Product packing list: 1pc* AUTOOL BT280 Electric System Tester main unit 1pc* Battery clamp 1pc* Probe adapter 2pc* Test probe tip 1pc* 25Amp fuse 1pc* Relay test line 1pc* User manual Multi-function Mode : Voltage Test, Continuity Test, Polarity Test.Voltage Test : Used for voltage measurement of the circuit under test.APPLICABLE MODELS : Applicable to cars, trucks, motorcycles and other models. Continuity Test : Open- circuit, closed-circuit, virtual circuit and real circuit can be detected. If the indicator light is on, it means that the circuit under test is a closed-circuit or a real circuit. If the indicator light is off. it means that the circuit under test is a open-circuit or a virtual circuit.Polarity Test : Test the circuit polarity, the green light represents the positive pole and the red light represents the negative pole. The green light represents the positive pole. The red light represents the negative pole.OVERLOAD PROTECTION : It is applicable to 9-3OV DC, when the voltage or current is overloaded, it will start the overload protection to reduce losses. When the measured voltage is greater than 30V or the measured current is greater than 10A, The device will start the self-protection settings Multi-Language OptionsSupports Multiple Languages:Including English, Russian, German, Spanish, French, Italian, Portuguese.PolishAC Voltage Detection ModeIt detects the maximum and minimum voltage, supply frequency, and duty cycle of the circuit under test.DC Voltage Detection ModeIt can detect the voltage value of the circuit under test.Resistance Detection ModeThis detects the resistance value between the probe of the circuit under test and the auxiliary ground wireWork Mode IncludingDC voltage, AC voltage, Resistance, Tone On/Off, Red/Green polarity LED,Convenient for a variety of different tests.39FT Inspection Extension CableCovering from the front to the rear of the vehicle,you can easily inspect the entire electrical circuit system. 1.5M Power Cable 4.9ft long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds. DC Voltage DC Voltage Mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage. Resolution is 0.1V. AC Voltage AC Voltage Mode, contact the probe tip to a circuit, the LCD display will read the max/min voltage, frequency and duty cycle. Diode Test Mode Quickly test the working state of the diode component and determine whether it is continuity or not Resistance Detection ModeThis detects the resistance value between the probe of the under test and the auxiliary ground wireLED Light To enable users to successfully complete circuit testing even in a dark environment Support 6~24V DC voltage testAUTOOL BT160 is suitable for the diagnosis of all 6V to 24V DC vehicle electrical systems. It checks the continuity of switches, relays, as well as diodes, fuses, wires and circuits, which can help reduce diagnostic time for automotive electrical systems.Handy & Easy OperationAll-in-one body with compact size is more ergonomic overall. The weight of the whole unit is less than 0.5KG, which is quite handy and great to use. The inspection cable is 4 meters in length and can cover from the vehicle's engine to the car's taillights, enabling easy inspection of the car's circuit system.Clear guidance of indicator lightThis power circuit probe kit helps quickly identify the positive and negative of cables and plugs. The red light indicates the positive, while the green light indicates the negative. Continuity testAUTOOL BT160 circuit tester can carry out continuity test. Test Procedure: Unfold the tool's cable and connect the red clip to the positive end of the vehicle battery and the black clip to the negative end of the vehicle battery; connect the auxiliary ground wire to one side of the test lead and the probe tip to the other side.f there is continuity in the vehicle circuit, the LED will glow green. If the LED does not glow, there is no continuity.Check for poor ground contactTest procedure: unfold the cable, connect the red clip to the positive end of the vehicle battery and the black clip to the negative end of the vehicle battery; press the button to the "-" side, the LED should glow red and provide positive voltage; then quickly get the probe tip as close as possible to the negative end of the component, at this point, the LED turns green and the buzzer sounds. This indicates a good ground. In case the ground is poor, the LED remains red and the buzzer fails to sound.Packing list1*AUTOOL BT160 automotive circuit tester main unit1*User Manual1*Qualification certificate1*Cable clip1*Probe tip1*4m extension cable 下载视频 MORE PRODUCTSMORE PRODUCTSMORE PRODUCTS 3 WARRANTY&SERVICEDelivery DetailsMORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 WARRANTY&SERVICE Delivery Details1.We will ship according to your EBAY address but sorry that we can not accept P.O.BOX address. Please make sure it’s correct . This will help your product to be received safely and quickly! 2.International Buyers Please Note: 1) Please check with your country customs office to determine what these additional Import tariffs costs will be prior to bidding / buying. 2) It's the buyer's responsibility to complete clearance when parcel reached your Customs. We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates vary from country to country, please understand. 3. Any further queries, please don't hesitate to email us. Thank you
Price: 14.99 USD
Location: Bordentown, New Jersey
End Time: 2024-03-16T01:38:38.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Accessories: Carrying Case, Clamps, Probes, User Guide
Brand: AUTOOL
Features: Analog Display, Continuity Testing, Digital Display, Relay & Component Testing, Voltmeter
Manufacturer Part Number: BT160 BT260 BT280
Vehicle Type: ATV, Heavy Duty/Commercial, Motorcycle, Passenger Vehicle
Volt: 9V-30V
Warranty: 3 Year
Function 1: Test the Voltage, resistance, Positive
Function 2: Positive and Negative poles of component
Function 3: Test the common automotive relay
Function 4: Display the parameter curve diagram of the tested
Multi-language 1: English, Spanish, German, Russian, Italian
Multi-language 2: Polish, Portuguese, French, Vietnamese, Malaysian
Multi-language 3: Filipino, Indonesian, Arabic
Type: Circuit Tester PowerScan Electrical Test Tool
LCD: TFT color display
Available Variations
Color: BT280
Price: 129 USD
Available Quantity: 20
Quantity Sold: 8
Color: BT260
Price: 59.99 USD
Available Quantity: 0
Quantity Sold: 0
Color: BT250
Price: 38.99 USD
Available Quantity: 29
Quantity Sold: 1
Color: BT160
Price: 17.99 USD
Available Quantity: 26
Quantity Sold: 6
Color: BT210
Price: 14.99 USD
Available Quantity: 20
Quantity Sold: 1
