Description: Why purchase a recycled keyless entry remote transmitter? The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today! Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #. What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system. Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below. Manufacturer Audiovox / Prestige / Pursuit / Pro FCC ID # ELVATNA Compatible FCC ID#(s): ELVATMA ELWATNA EIVATNA ELV-ATNA, ELV ATNA, ELVATNA Nutek Corporation Transmitter ATNA Part #(s) 145SP Dealer #(s) Button Count: 5; LOCK, UNLOCK, TRUNK/KEY, 1,2 Battery (installed): 1; CR2032 Frequency: 909.6-918 MHz LED Light Color: Green Circuit board #s: ATNA AA1 #s on Chip on board: Condition Notes: Pre-Owned ready to program to your compatible vehicle RKE system. Compatible Aftermarket Installed Systems: APS596E APS687E APS787E APS997E PRO9276E PRO9776E Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. Note: It is important to remember that during the programming mode, each individual step must be completed within 15 seconds of the previous step. If the 15 second time limit expires between steps, the unit will automatically exit the program mode. This is indicated by a long chirp from the siren. Non alarm models will flash the parking lights only to confirm the transmitter code has been learned and stored. 1. Enter the vehicle and turn the ignition switch to the on position. 2. Press and release the valet push button switch three times. a. Some systems may use a combination push-button LED switch. In these systems the push-button and the dash-mounted LED are one and the same. 3. The dash mounted LED will flash once and the siren will chirp once, indicating that the system is ready to accept programming of mode #1 which is arm/lock, disarm/unlock/unlock 2, and panic functions. 4. Press and hold the lock or lock/unlock button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. Repeat step 4 for each transmitter you wish to program. Note: If your transmitter button has the lock/unlock icon on one button, press and release the valet push button switch 2 times then move on to step #8. 5. Press and release the valet push button switch one time to advance to mode 2. The siren will chirp 2 times and the dash-mounted LED will flash 2 times, indicating that the unit is ready to accept programming for mode #2 which is only used for separate lock and unlock button transmitters and is the disarm/unlock/unlock 2 and panic. 6. Press and hold the unlock symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. Repeat step 6 for each transmitter you wish to program. 7. Press and release the valet push button switch one time to advance to mode 3. The siren will chirp 3 times and the dash-mounted LED will flash 3 times, indicating that the unit is ready to accept programming for mode #3 which is the trunk release/alternate output mode of the system. 8. Press and hold the trunk/key symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. Repeat step 8 for each transmitter you wish to program. 9. Press and release the valet push button switch one time to advance to mode 4 if so equipped. The siren will chirp 4 times and the dash-mounted LED will flash 4 times, indicating that the unit is ready to accept programming for mode #4, optional device (where equipped). 10. Press and hold the option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. Repeat step 10 for each transmitter you wish to program. 11. Press and release the valet push button switch one time to advance to mode 5 if so equipped. The siren will chirp 5 times and the dash-mounted LED will flash 5 times, indicating that the unit is ready to accept programming for mode #5 optional device (where equipped). 12. Press and hold the second option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. Repeat step 12 for each transmitter you wish to program. 13. Within 10 seconds, press and release the valet program switch one time. The siren will emit 6 short chirps indicating mode 6 has been entered. 14. Within 10 seconds, press and hold the unlock button, or any unused button(s), of the first transmitter you wish to control mode 6 output (Driver Priority 1), until a long chirp is heard from the siren. Repeat this for each transmitter you wish to operate the mode 6 output, Driver Priority 1. 15. Within 10 seconds, press and release the valet program switch one time. The siren will emit 7 short chirps indicating mode 7 has been entered. 16. Within 10 seconds, press and hold the unlock button or any unused button(s) of the first transmitter you wish to control mode 7 output (Driver Priority 2), until a long chirp is heard from the siren. Repeat this for each transmitter you wish to operate the mode 7 output, Driver Priority 2. Note: Mode 6 & 7 can be used as separate output to control a function other than driver priority. Simply programming any unused transmitter button other than the unlock button will allow complete independent control of these outputs. Why does your vehicles installed RKE / Security system determine which remote control your can purchase? The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system. Programming: We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer. Programming Requirement Information NOTE: The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions: 1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems. 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence. To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following: i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote) ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?) 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand. 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems). 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems). 6. There are also many auto forums that you can go onto by just conducting a google search with your questions. 7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer. Normal 0 false false false EN-US X-NONE X-NONE
Price: 28.34 USD
Location: Wellsboro, Pennsylvania
End Time: 2025-01-10T18:22:24.000Z
Shipping Cost: 6.96 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Non-Domestic Product: No
Warranty: 60 Day
Custom Bundle: No
Color: Black
Programming: DIY and/or Qualified Locksmith- See description
Manufacturer Part Number: FCC ID ELVATNA car starter key fob keyless entry control beeper
For Vehicles with:: pre-existing Aftermarket installed system ONLY
Compatible System: APS596E APS687E APS787E APS997E PRO9276E PRO9776E
Modified Item: Yes
Installed Battery Type & Quantity: 1: CR2032 working battery (not tested for life)
California Prop 65 Warning: N/A
Brand: Prestige
2-Way Paging: No
Unit Type: Unit
Programming NOTE: You must program this remote to sync w/ system
Model: APS596E APS687E APS787E APS997E PRO9276E 145SP
Surface Finish: 5; LOCK, UNLOCK, TRUNK/KEY, 1,2
Features: Remote Start, Trunk Release, Ready to Program - Battery Installed, Green LED Light, TESTED - working 100%, Keyless entry remote car keyfob key fob auto starting starter fab
Stock #: 548C
Country/Region of Manufacture: Unknown
Unit Quantity: 1
