9IMOD F4 V3S PLUS FC Flight Controller for RC QAV/ZMR 210 230 250MM RC Drone

Description: 9IMOD F4 V3S PLUS FC Flight Controller Board Support BetaFlight Built-in Barometer OSD 5V 9V Dual Output with 4in1 45A 60A Brushless ESC for RC QAV/ZMR 210 230 250MM RC Drone FPV Racing QuadcopterFeatures:1. Betaflight F4 V3S PLUS FC flight controller board for RC FPV drone.2. Size: 36x36mm, Mounting Holes: 30.5x30.5mm.3. We updated the FC with high-quality BMI270 gyro. Built-in barometer for accurate height calculation.4. F4 V3S PLUS also has onboard 5V and 9V BEC output, which supports DJI sky end power supply and provides stable power supply voltage for external devices such as receivers, faxes and cameras.5. The function of the flight control is to control the drone through the gyroscope on the flight control board.Descriptions:Flight control using the most common on the market F4V3 series of flight control F4V3S PLUS, all interfaces and solder joints have been re-arranged to optimize the layout, more convenient to install the welding line, more practical. On-board filtering of the flight control, OSD output image ripple reduction, the picture is pure and clear.Specification:F4 V3S PLUS FCItem name: F4 V3 PLUS Flight ControllerSize: 36x36mmMounting holes: 30.5x30.5mmSTM32 F405 MCUDshot supportDrag and Drop OSD configured via BetaflightGyro:BMI270SBUS / PPM AND Spketrum DSMX portsMicroSD card blackboxBaro (BMP280)BEC: 5V3A/9V3AOn-board video filters (only 5V to VTX and camera)Please note: The F4 V3S Plus Flight Controller only support Betaflight software, INAV firmware is not supported!45A 4-in-1 ESCSize: 41*39.5*5mmHole distance: 30.5*30.5/5mm (3mm hole diameter after installing the shock-absorbing ball)Weight: 13gInput voltage: LIPO 2-6SContinuous current: 45AMaximum current: 50A (10 seconds)Processor: EFM8BB21F16GFirmware: BLS J_H_30_REV16_7Drive signal support: DShot300-600/Multishot/Oneshot/PMWCurrent sensor: Support 60A 4-in-1 ESCThe installation size is 30.5mm*30.5mm, the mounting hole is M4, and it supports shock-absorbing column installationESC onboard current sensor.Weight: 13gInput voltage: LIPO 2-6SContinuous current: 60AInstantaneous current [5 seconds]: 70AFirmware: BLS J_H_30_REV16_7Processor: EFM8BB21F16GThe ESC has on-board filter capacitors to suppress the back electromotive force, stabilize the battery voltage, and protect the precision components of the flight control ESCPackage List:As your chooseNote:Only the above package content, other products are not included.1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!Before purchase:1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.2.Please read the item description, if you have any question, do not hesitate to contact us.3.No warranty,if you receive a defect item,please contact us at once with item picture.4.Use the vouchers for more saving.After purchase:1.If you are satisfied,please express your use feeling.2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.

Price: 27.61 USD

Location: Shenzhen

End Time: 2024-03-20T15:13:54.000Z

Shipping Cost: 0 USD