4x156 to 6x5.5 / 6x139.7 Wheel Adapters 14x1.5 stud 1.75 in thick 131mm bore x 2

Description: 4x156 to 6x5.5 / 6x139.7 Wheel Adapters 14x1.5 stud 1.75 in thick 131mm bore x 2 4x156 to 6x5.5 / 6x139.7 Wheel Adapters 14x1.5 stud 1.75 in thick 131mm bore x 2 These are custom built not returnable wheel adapters for a unusual application. Two Piece US Made Wheel Adapters Pair of 2 US Made Billet Wheel Adapters cut from 6061 T6 Billet Aluminum made in the USA This listing is for two (2) wheel adapters and each adapter is two pieces so you would have enough to change the bolt pattern of two wheels. Part # = USA-4156-6550D9-131 Quantity = 2 Vehicle Bolt Pattern = 4x156 Wheel Bolt Pattern = 6x139.7 / 6x5.5 Adapter Center Bore = 131mm 1" deep only on back piece Wheel Lip Ring = $ Extra Custom Order Adapter Studs = 14x1.5Only 4 lug nuts included per adapter in same size as adapter studs unless otherwise requested. Thickness = 1.75" The studs on your vehicle need to be trimmed down for installation of these adapters if they are longer than 1 inch. You will need conical seat lug nuts in 3/4 hex to fit your vehicle for installation. The bolts that holds the two pieces of these adapters together should be torqued to 60 to 65 pounds and I also recommend using the removable blue Loctite on the black bolts. Pay particular attention that the lug nuts or studs from the vehicle do not touch the second piece of the adapter. These Adapters Are Not ReturnableNeed Help? If you have any questions, please message us and get the answers before your purchase.It is your responsibility to ensure that the written description which includes the bolt pattern of the vehicle, bolt pattern of the wheel, center bore and stud / lug nut size are all correct for your application.If you are not sure about anything please ask. We are available with professional advice. 8-4 PST Mon - Thur 8-3 Fri USAdaptersInstallationInstallation is of critical importance with wheel adapters.Professional installation is strongly recommended.Slip fit the adapter on the wheel and the vehicle before you bolt anything on to ensure that you have proper fitment.Installed adapters are not returnable.Mating surfaces must be clean and free of rust and obstructions allowing for the adapter to sit flat on the rotor, and the wheel flat on the face of the adapter.Make Sure the lug nuts or studs from the vehicle do not touch the back of the wheel.Torque by hand, do not use impact gun for installation.Improper Installation Voids All Warranties.Installing Two-Piece AdaptersI addition to all other instructions, with a two piece adapter Make Sure the hub, studs or lug nuts from the vehicle do not contact the second piece of the adapter or it will cause failure.Open ended 3/4" hex conical seat lug nuts, short enough to not touch the second piece of the adapter are required to fit the vehicle. (Not included)The black bolts that hold the two pieces together should be torqued to 60 to 65 foot-pounds and I also recommend using blue removable Loctite on these bolts.Do Not Use Impact Gun to tighten adapter bolts/lugs, torque by hand. Bolt PatternsThe bolt pattern of the vehicle comes first in the listing and the wheel bolt pattern is listed after the word "to".3, 5 and 7 lug bolt patterns measure differently than 4, 6, or 8 lugVehicle StudsIf the studs on your vehicle are longer than the adapter is thick, you may need to trim them down so they do not touch the back of the wheel.Factory lug nuts are often too big to recess in an adapter so they may need to be replaced.Studs / Lug NutsThese wheel adapters require a conical seat lug nut or bolt.One set of open ended conical seat bulge lug nuts are included with the adapters in the same size as the studs in the adapter unless otherwise requested or advertised above.Different wheels require different kinds of lug nuts, make sure you get the proper lug nuts for your wheels in the right size to fit the studs in the adapter.Center BoreThe center hole of the adapter must be large enough to fit over the hub of the vehicle. It can be larger, which is called lug centric, where the conical seat lug nuts center the adapter on the hub.HubcentricHubcentric refers to an adapter where the center hole of the adapter perfectly fits over the hub sticking out on the vehicle.Wheel-centricWheel centric is available for extra cost in most applications for the person that wants the best and closest to factory fit that you can get, or you want extra strength, then wheel centric is optional. If you have wheels that require a radius seat lug nut, it is strongly recommended.PicturesThe pictures are of stock adapters and may not look exactly like what you get due to differences in bolt patterns and center bore sizes.You will receive the item as described in the written description of the listing.PricesOur prices are higher than many other sellers because they are usually cheap, inferior wheel adapters made in China.We are a US manufacturer based in San Bernardino California where we use US sourced billet aluminum providing the best materials for construction of our wheel adapters.The US sourced aluminum that we use for construction is superior and more costly than that from China and it costs more for labor in the US which is why our wheel adapters cost more.AuthenticityBeware of unscrupulous sellers of wheel adapters (there are many) who would imply or even straight up lie by saying that their adapters are US-made, but they're Chinese imports, these are truly US-made wheel adapters made by US citizens from US sourced aluminum in our machine shop in San Bernardino California WarrantyImproper Installation or alteration Voids All Warranties.If you have a problem with your purchase please contact us so we can help you resolve the issue.We do Not guarantee that the part you buy will fit your car, if you ask us specifically and give us correct information we can help you get the right part. We guarantee our parts are as described in the written part of the listing, please read carefully and ask any questions you have before purchase.We offer a limited lifetime warranty on our US-made wheel adapters.This warranty covers the aluminum construction of the adapter, if it should ever fail we will replace the defective part.This warranty is limited to part replacement only, user agrees to assume all other responsibility and or liability arising from use of this product.Wheel studs are a wear part, and are replaceable in the adapter, there are many ways to damage them that have nothing to do with construction so wheel studs are not covered under this warranty, if you need stud replacements we have them available for sale online.NO Refunds NO Returns ContactPlease Contact us with ANY questions Before purchase, we can no longer display our phone number in our listings but there is a "contact seller" link at the top right of this page in the box called Seller Information where you can contact us through the message system or find the phone number.Thank You And Have a Blessed Day Custom Adapters with Other Specs Are Available.

Price: 235.39 USD

Location: San Bernardino, California

End Time: 2023-08-19T21:10:41.000Z

Shipping Cost: 0 USD