1/2" x 5" Simpson Strong Tie THD50500H Titen HD Concrete Screw Anchor Zinc

Description: Titen HD® Heavy-Duty Screw Anchor Image & Video GalleryOn This PageThe original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD offers low installation torque and outstanding performance. Designed and tested in dry, interior, non-corrosive environments or temporary outdoor applications, the Titen HD demonstrates industry-leading performance even in seismic conditions.The stainless-steel Titen HD is the optimal choice for applications in corrosive or extreme environments such as salt water, or when chemical or corrosive solutions are present. See Stainless-Steel Titen HD for more information.Key FeaturesCode listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete per ICC-ES ESR-2713Code listed under IBC/IRC in accordance with ICC-ES AC106 for masonry per ICC-ES ESR-1056Qualified for static and seismic loading conditionsThread design undercuts to efficiently transfer the load to the base materialStandard fractional sizesSpecialized heat-treating process creates tip hardness for better cutting without compromising the ductilityNo special drill bit required — designed to install using standard-sized ANSI tolerance drill bitsTesting shows the Titen HD installs in concrete with 50% less torque than competitor anchorsHex-washer head requires no separate washer, unless required by code, and provides a clean installed appearanceRemovable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be movedReuse of the anchor to achieve listed load values is not recommendedMaterialCarbon steelFinishZinc plated or mechanically galvanizedNot recommended for permanent exterior use or highly corrosive environmentsInstallationDrill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth plus minimum hole depth overall (see table below) to allow the thread tapping dust to settle, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping.Insert the anchor through the fixture and into the hole.Tighten the anchor into the base material until the hex-washer head contacts the fixture.Titen HD Diameter (in.)Wrench Size (in.)Recommended Fixture Hole Size (in.)Min. Hole Depth Overdrill (in.)Suggested fixture hole sizes are for structural steel thicker than 12 gauge only. Larger holes are not required for wood or cold-formed steel members.1/43/83/8 to 7/161/83/89/161/2 to 9/161/41/23/45/8 to 11/161/25/815/163/4 to 13/161/23/41 1/87/8 to 15/161/2 CautionHoles in metal fixtures to be mounted should match the diameter specified in the table below.Use a Titen HD screw anchor one time only — installing the anchor multiple times may result in excessive thread wear and reduce load capacity.Do not use impact wrenches to install into hollow CMU.Oversized holes in base material will reduce or eliminate the mechanical interlock of the threads with the base material and reduce the anchor’s load capacity.

Price: 10.8 USD

Location: Redding, California

End Time: 2024-09-15T22:04:01.000Z

Shipping Cost: 0 USD

Product Images

1/2" x 5" Simpson Strong Tie THD50500H Titen HD Concrete Screw Anchor Zinc

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Brand: Unbranded

Material: Steel

MPN: Does Not Apply

California Prop 65 Warning: Crude oil, gasoline, diesel fuel and other petroleum products can expose you to chemicals including toluene, benzene, and nickel which are known to the State of California to cause cancer and birth defects or other reproductive harm. These exposures can occur in and around oil fields, refineries, chemical plants, transport and storage operations such as pipelines, marine terminals, tank trucks and other facilities and equipment.

Fastener Type: Lag Shield